Call Or Email Us:

Metal Work Supplies Ltd
Unit 15 Grandstand Business Centre
Faraday Road
Hereford
Herefordshire
HR4 9NS
UK

Everbuild Lumberjack 30 Minute Wood Adhesive Gel

Call for Price

Lumberjack 30 Minute Polyurethane Wood Adhesive Gel is a transparent, gap filling gel which sets hard in 30 minutes.

As well as bonding all common wood types (hard, soft, exotic, painted) Lumberjack 30 Minute will also bond Formica, polystyrene, PU foam metal and glass wool and various plastics to porous surfaces. These products also adhere to stone, concrete, brick and masonry.

Application

Cartridge Products: Cut tip of cartridge taking care not to damage the thread. Fix nozzle, cut to required aperture and apply using standard sealant gun. Wearing of gloves is recommended.

Apply adhesive evenly to one surface. If necessary, cover large areas with a fine toothed spreader. Assemble parts IMMEDIATELY and clamp for duration of cure (5-30 minutes at 20oc; longer at lower temperatures). After this time, the joint may be easily handled. Full and final bond strength will be achieved after 30 minutes for 5 minute set or 24 hours for 30 minute set.

NOTE: These products foam slightly on application to fill small gaps.

 

SKU: 30MINPU3 Category:

Description

Lumberjack 30 Minute Polyurethane Wood Adhesive Gel is a transparent, gap filling gel which sets hard in 30 minutes.

As well as bonding all common wood types (hard, soft, exotic, painted) Lumberjack 30 Minute will also bond Formica, polystyrene, PU foam metal and glass wool and various plastics to porous surfaces. These products also adhere to stone, concrete, brick and masonry.

 Benefits of Lumberjack 30 Minute

  • Fast setting – 30 minute set (Typical PVA based wood glue – 8-12 hours)
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use
  • Fully water proof to EN204 D4, including seawater.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent Chemical Resistance.

Areas For Use

  • General wood jointing and construction
  • Window and door frame manufacture
  • Door manufacture
  • Furniture manufacture
  • Boat building
  • Construction of staircases and ladders
  • As a high quality insulation adhesive for foam/glasswool/fibre boarding

Limitations

  • At least one of the surfaces to be bonded must be porous.
  • Not suitable for polyethylene, polypropylene, Teflon or Nylon.
  • Surfaces may be damp, but moisture content of wood must not exceed 30%w/w.
  • Do not use on sheet laminate.
  • Only apply between + 5 and + 30oC.
  • Ensure surfaces are always clamped during use.
  • Setting times will be increased at low temperatures and low humidity.

Surface Preparation

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet.

Application

Cartridge Products: Cut tip of cartridge taking care not to damage the thread. Fix nozzle, cut to required aperture and apply using standard sealant gun. Wearing of gloves is recommended.

Apply adhesive evenly to one surface. If necessary, cover large areas with a fine toothed spreader. Assemble parts IMMEDIATELY and clamp for duration of cure (5-30 minutes at 20oc; longer at lower temperatures). After this time, the joint may be easily handled. Full and final bond strength will be achieved after 30 minutes for 5 minute set or 24 hours for 30 minute set.

NOTE: These products foam slightly on application to fill small gaps.

 

Specific Data

Colour  

Translucent

 

Contents 100% prepolymers and catalyst (solvent free)
Solids 100% (solvent free)
Viscosity 200 x103  mPa.s  (bfld RVT sp7 5rpm) (gel)
Coverage 400g/m², or 10 linear meters per tube (approx)
Initial Set Time 30 minutes
Flash Point N/A
Cleaner Everbuild Gun Foam Cleaner or acetone BEFORE curing. After cure, use mechanical abrasion.

Storage

Store in original unopened containers between 10 and 25oC then reseal immediately once used or disposal will be necessary.

Shelf Life

Twelve months from date of manufacture in original unopened containers. 6 months from date of manufacture for 5 minute liquid grade.